LIGHT FITTING FOR FLUORESCENT LAMP EXPLOSION PROOF
- Description
Description
Product detail:
- Explosion protection to:
– IECEx certificate CQM 19.0013X
– CENELEC
– NEC - Can be used in:
– Zone 1 and Zone 2
– Zone 21 and Zone 22
– Class I, Zone 1 and Zone 2
– Class I, Division 2, Groups A,B,C,D - Two enclosure types: Type I and Type II
- Available Lamp and Power (LED):
– Built in power supply (LED lamp and driver power are integrated type): 9W x 1, 18W x 1, 9W x 2, 18W x 2
– External power supply (LED lamp and driver power are split type): 14W x 1, 14W x 2, 28W x 1, 28W x 2 - Enclosure in glass fibre reinforced polyester (GRP) with a polycarbonate diffuser.
- Ex e enclosure with explosion-proof components inside
- Safety interlock between enclosure and diffuser. The light switches off if opened.
- Built-in LED driver with wide voltage input, CC-CV (constant current, constant voltage) output. Power factor ≥ 0.95
- An emergency unit is available with protection against over charging and over discharge.
Technical parameters | |
Conformity to standards | IEC60079, EN60079, GB3836, GB12476,CCS standard |
Ambient temperature | -25℃~+55℃ |
Light sourc | T8 Fluorescent tube |
Degree of protection | IP66 |
Corrosion-proof | WF2 |
Cable entry | 2×M20×1.5, applicable to Φ9~Φ16mm cable |
Terminal | 3×1.5~4mm² |
Installation dimension in mm | ||||||
Type | Rated power(W) | A | B | L | W | H |
BAY51-Q-18×2 | 18W×2 | 450 | 210 | 760 | 222 | 145 |
BAY51-Q-36×2 | 36W×2 | 800 | 210 | 1332 | 222 | 145 |
Selection table | ||||||
Type | Rated voltage (V) | Rated power | Luminous flux | Ex-Mark | Weight(Kg) | |
GB | IECEX/ATEX | |||||
BAY51-Q 18×2 | 96V~254V AC 50 / 60Hz | 18W×2 | 2600 | Ex d e q ⅡC T4 Gb
Ex tD A21 IP66 T80℃ |
Ⅱ2 G Ex d e q ⅡC T4 Gb
Ⅱ2 D Ex t ⅢC T80℃ Db IP66 |
6.9 |
BAY51-Q 18×2J | 8.7 | |||||
BAY51-Q 36×2 | 36W×2 | 6500 | 11.4 | |||
BAY51-Q 36×2J | 13.1 | |||||
The light fitting is supplied with Ex type stopping plug and Ex cable gland is on request. |
#SPARE PART #EXPLOSION PROOF #LIGHT FITTING #FLUORESCENT LAMP